ФОРМА КНД 1151085 ПРИМЕР ЗАПОЛНЕНИЯ
The UI could be divided to 4 parts: If newly set sensitivity does not match reference waveform, the latter will be cleared. The maximum input voltage could be 80Vpp. When blinking, press up and down to select different level of sensitivity. Press M to load current waveform to display from SD card. Tools What links here Related changes Special pages Printable version Permanent link Page information.Horizontal main menu on top of screen, Navigate by left and right, adjust by up and down. DSO nano is a pocket size digital storage oscilloscope fulfills basic electronic engineering requirements. DAT must be prepared by connecting to PC by USB. When blinking, press up and down to adjust the vertical position of the waveform. If newly set sensitivity does not match reference waveform, the latter will be cleared. When blinking, press left and right to choose trigger mode of rising edge or falling edge.
Use cursor up , down, left , right to navigate among the three operational parts and make adjustments. The maximum input voltage could be 80Vpp. When blinking, press up and down to select different sensitivities. Views Read View source View history. When blinking, press left and right to scroll waveform horizontally. When blinking, press up and down to select 4 different synchronization mode: Press M to load current waveform to display from SD card.
When blinking, press left and right to adjust the frequency of reference square wave. Navigation Electrodragon Home Electrodragon Store Wiki Home Community portal Current events Recent changes Random page Mediawiki Help. The UI could be divided to 4 parts: However, we did not test that, and we are not responsible for any damage and injury because of measuring high voltage. Retrieved from " http: Privacy policy About ElectroDragon Disclaimers.
AUTO, NORM, SING, and NONE. The DSO Nano v1 can use the same firmware as v2. When blinking, press up and down to select different level of sensitivity. When blinking, press left and right to adjust trigger sensitivity, trigger level marker Yellow dotted area changes correspondingly.
Power supply by internal battery or USB port. So when using a 10x probe on the Nano DSO, it could be Vpp. When blinking, press left and right to adjust trigger level, trigger level marker Yellow dotted line changes correspondingly.
Tools What links here Related changes Special pages Printable version Permanent link Page information. Battery bar will be displayed when powered from internal. Click here to buy. This page was last modified on 7 June , at
Press M to save current waveform on display to SD card. Use cursor up , down, left , right to navigate among the three operational parts and make adjustments. The UI could be divided to 4 parts: Power supply by internal battery or USB port.
When blinking, press up and down to select different level of sensitivity. Privacy policy About ElectroDragon Disclaimers.
Battery bar will be displayed when powered from internal. Horizontal main menu on top of screen, Navigate by left and right, adjust by up and down. When blinking, press up and down to select different sensitivities. When blinking, press left and right to adjust trigger level, trigger level marker Yellow dotted line changes correspondingly.
If newly set sensitivity does not match reference waveform, the latter will be cleared. When blinking, press left and right to choose trigger mode of rising edge or falling edge. DSO nano is a pocket size digital storage oscilloscope fulfills basic electronic engineering requirements.
Navigation menu Personal tools Log in. So when using a 10x probe on the Nano DSO, it could be Vpp. See the common DSO Nano page for more information. Press M to load current waveform to display from SD card. When blinking, press left and right to scroll waveform horizontally. DAT must be prepared by connecting to PC by USB. Tools What links here Related changes Special pages Printable version Permanent link Page information.
When blinking, press up and down to adjust the vertical position of the waveform. This page was last modified on 7 June , at
When blinking, press left and right to choose trigger mode of rising edge or falling edge.
Press M to save current waveform on display to SD card. AUTO, NORM, SING, and NONE.